sE Electronics sE8 Stereo Pair
Without VAT:
$342.95
$414.97
Remote warehouse: 1+ pcs. availableDelivery in 7-14 business days
Models / Alternatives
Ask our experts!
Description
Designed for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package. The sE8 itself is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response. With two microphones matched specifically for consistency, you'll be able to capture a clear and accurate stereo image.
The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.
Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You'll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.
To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they're not in use.
Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You'll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.
To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they're not in use.
Features
- Cardioid Polar Pattern
- Matched Pair for Stereo Recordings
- Gold-Sputtered, Small-Diaphragm Condenser
- Transformerless Design for Transparency
- Selectable -10 dB and -20 dB Pad
- Low-Cut Filter at 80 Hz and 160 Hz
- All-Metal Chassis
- Includes 2 Mic Clips
- Includes Windscreens & Mounting Bar
- Includes Metal Flight Case
What's in the box?
- sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)
- Set of Mic Clips and Thread Adapters
- Set of Windscreens (2x)
- Stereo Mounting Bar
- Metal Flight Case
Specification
| Frequency Range | 20 - 20 000 Hz |
| Impedance | 110 Ω |
| Sensitivity | 25 mV/Pa |
| Outer Dimensions | 12 x 2.3 cm |
| Weight | 141 g |