Tascam DR-100 MK3 Digital Recorder
The Tascam DR-100 MK3 is a linear PCM recorder which supports 24-bit/192 kHz recording resolution and is able to record MP3 and WAV files—even at the same time, in dual-recording mode. A different dual-recording mode allows you to record a lower-level safety track in case the initial recording clips, and XRI mode will write the settings used to record the track within the file itself; recorder, mics, level, low-cut filter implementation, limiter, and pad will be represented therein, making your editor's or post-production engineer's life a lot easier.
The recorder utilizes AKM AK4558 converters, offers a 109 dB signal-to-noise ratio, sports a temperature-compensated clock, and includes a built-in limiter, variable low-cut filter, and pad. The built-in mic operates in an A/B pattern, and two combination jacks with low-noise HDDA mic preamps can accept XLR and 1/4" terminations. This unit records to SDXC cards up to 128GB in size, and runs on a combination of a rechargeable lithium-ion battery and AA batteries, allowing you to swap the disposable power supply while recording without disrupting the process of capturing audio.
On-Board A/B Stereo Microphone
Records up to 24-Bit/192 kHz
Records to SDXC Cards up to 128GB
2 x XLR/TRS Combo Inputs
Backlit LCD Display
Clock Accuracy up to 1ppm
AKM AK4558 ADC with 109 dB S/N Ratio
Uses Rechargeable Li-Ion & AA Batteries
|Outer Dimensions||15.6 x 8 x 3.5 cm|